An interpreter is
1.A program that places programs into memory an prepares them for execution
2.A program that automate the translation of assembly language into machine language
3.A program that accepts a program written in high level language and produces an object program
4.Is a program that appears to execute a source program as if it were machine language
Posted Date:-2022-06-08 02:21:10
Control returns in calling program at correct place exactly from
1.place it lefts
2.end of program
3.start of program
4.middle of program
Posted Date:-2022-06-07 13:12:00
Explanations at right side of mnemonics and symbolic addresses are called
1.user comments
2. compiler comments
3.assembler comments
4.programmers comment
Posted Date:-2022-06-07 12:50:53
Function which is placed between FOR statements and other repeated statements is classified as
1.FOR loop
2.DO function
3.GO function
4.WHILE function
Posted Date:-2022-06-07 13:15:46
If element in array has two subscripts, then array has
1.single dimension
2.two dimensions
3.three dimensions
4.four dimensions
Posted Date:-2022-06-07 12:09:13
In BASIC language, '150 LET Area=Width*Length' , optional word is
1.LET
2.area
3.width
4.length
Posted Date:-2022-06-07 12:59:18
In COMAL language programs, procedures are defined between
1. first two statements
2.start and stop statement
3.PROC and non-PROC statement
4.EXEC and non-EXEC statement
Posted Date:-2022-06-07 12:51:55
In COMAL language programs, procedures are usually executed by
1. EXEC statement
2.PROC statement
3.CLOSED statement
4.start PROC statement
Posted Date:-2022-06-07 13:04:47
In high level programming language BASIC, statements written with GOTO and IF commands are considered as
1.loop
2.case
3.format
4.condition
Posted Date:-2022-06-07 12:54:45
In line '400 IF NAMEINR ="***" THEN Average= Total Mark/N' of BASIC program, AVERAGE is considered as
1.real numbers
2.negative integers
3.rational variables
4.irrational numbers
Posted Date:-2022-06-07 12:48:47
In line "300 INPUT NUM: PRINT 4.2*NUM*NUM+17" of a BASIC program, '300' is
1.variable
2.identifier
3.line number
4.single number
Posted Date:-2022-06-07 12:27:47
In line "400 INPUT NUM: PRINT 5.6*NUM+10" of a BASIC program, 'NUM is
1.constant
2.variable
3.exponent
4. real identifier
Posted Date:-2022-06-07 13:10:06
In line "750 INPUT NUM: PRINT 7.3*NUM*NUM+15" of a BASIC program, '7.3*NUM*NUM+15' is
1.an exponent
2.an expression
3.a fixed identifier
4.reserved identifier
Posted Date:-2022-06-07 12:37:29
In statement '100 LET N1 = LEN(AINR )' of BASIC language, built-in function is
1.LEN
2.LET
3.whole statement
4.numerical values
Posted Date:-2022-06-07 13:11:05
LDA is used instead of LOAD ACCUMULATOR and can be classified as
1.mechanics
2.mnemonics
3.lined addresses
4.symbolic addresses
Posted Date:-2022-06-07 12:38:52
Loop which does not executed at all if it is tested at beginning is classified as
1. DO loop
2.WHILE loop
3.REPEAT loop
4.GO REPEAT loop
Posted Date:-2022-06-07 13:20:51
Translation of assembly language into machine code is a task of
1.analysts
2.financer
3.assembler
4.programmer
Posted Date:-2022-06-07 13:21:43
Way data in program is to be set is called its
1.class
2.group
3.format
4.reference
Posted Date:-2022-06-07 12:56:30
A program which translates high level program into machine code is classified as
1.compiler
2.translator
3. instruction analyst
4.translating analyst
Posted Date:-2022-06-07 12:07:47
A special quantity whose value does not change is classified as
1. constant
2.mantissa
3.exponent
4.variables
Posted Date:-2022-06-07 12:57:33
An interpreter is a program that
1.places programs into memory and prepares then for execution
2. automates the translation of assemble language into machine language
3.accepts a program written in a high level language and produces an object program
4.appears to execute a resource as if it were machine language
Posted Date:-2022-06-08 02:22:16
Complier is used when data is to be processed in
1.batches
2. whole at one timed.
3.one line in one minute
4.four pages in five minutes
Posted Date:-2022-06-07 13:26:03
Computer language based on machine code is classified as
1.ordinary programming language
2.low level programming language
3.high level programming language
4.advanced level programming language
Posted Date:-2022-06-07 12:53:49
Device used to translate programming language into machine code is classified as
1.inverter
2.reversal
3.operator
4.assembler
Posted Date:-2022-06-07 13:13:40
Examples of program routine are
1.part of a program
2.set of instructions used
3.complete short program
4.All of the above
Posted Date:-2022-06-07 13:26:54
General term use for self-contained small set of instructions is referred as
1. routine
2.function
3.procedure
4.subroutine
Posted Date:-2022-06-07 12:52:52
High level language includes
1.COMAL
2.BASIC
3.both (a) and (b
4. STANDARD
Posted Date:-2022-06-07 13:05:36
In high level programming language Pascal, END statement lasts with the
1.colon
2. full stop
3.semicolon
4. double quotation marks
Posted Date:-2022-06-07 13:01:30
In JMP PRNT command, JMP and PRNT respectively are classified as
1.assembler and compiler
2.source and object program
3.low level and high level code
4.mnemonics and symbolic addresses
Posted Date:-2022-06-07 12:28:47
In line '500 IF NAMEINR ="***" THEN Average= Total Mark/N' of BASIC program, Total Mark and N are considered as
1.set of integers
2.positive odd numbers
3.positive even numbers
4. negative odd numbers
Posted Date:-2022-06-07 13:09:10
In line "200 INPUT NUM: PRINT 5.8*NUM+5" of a BASIC program, 'PRINT 5.8*NUM+5" ' is
1.statement
2.single variable
3. double identifier
4. reserved expression
Posted Date:-2022-06-07 13:02:24
In programming language, 'identifier' can be
1. array
2.variable
3.constant
4.All of the above
Posted Date:-2022-06-07 13:23:45
In statement "After last mark enter -1" in COMAL programming language, rogue value is
1.-1
2.last
3.mark
4.after
Posted Date:-2022-06-07 13:16:48
In structured programming language such as Pascal, operations is then refined using
1.secure data
2.procedure
3.virus free data
4.structured data
Posted Date:-2022-06-07 13:00:21
Indicate which of the following is not true about interpreter ?
1. Interpreter generate an object program from the source program
2.Interpreter analyses each source statement every time it is to be executed
3.Interpreter is a kind of translator
4.All of above
Posted Date:-2022-06-08 02:20:03
Names used to identify a specific location and are invented by programmers are called
1.mechanics
2.mnemonics
3.lined addresses
4.symbolic addresses
Posted Date:-2022-06-07 12:26:22
One or more numbers which helps distinguish elements in array is
1.classified as
2.low script
3.high script
4.superscript
Posted Date:-2022-06-07 13:28:11
Programming language 'COBOL' stands for
1.common business oriented learning
2. common binary orientation language
3.classic business orientated language
4.common business orientated language
Posted Date:-2022-06-07 12:55:51
Programming language that allows structuring of programs and data is
1.LOGO
2.COBOL
3.COMAL
4.PASCAL
Posted Date:-2022-06-07 13:12:46
Programming language used to encourage logical thinking is classified as
1.LOGO
2.COMAL
3.COBOL
4.PASCAL
Posted Date:-2022-06-07 12:35:15
Rogue value in statement "140 PRINT "For each one type in name. Type '***,0,0' to finish" is
1. asterisk
2. print command
3. numerical values
4.alphabetic statement
Posted Date:-2022-06-07 13:24:46
Second component in algorithms is classified as
1.repetition
2. constant selection
3.variable selection
4. variable sequence
Posted Date:-2022-06-07 12:49:54
Special character symbol '/' is used to indicate
1.director
2.direction
3.directive
4. direction arrows
Posted Date:-2022-06-07 13:18:51
Statement in Comal language 'IF age >=18 THEN PRINT "Yes" ELSE PRINT "No" is an example of
1.if else statement
2.if then statement
3.else one statement
4.if then else statement
Posted Date:-2022-06-07 12:30:06
Statement used to perform one of two possible actions is written as
1.if else statement
2. if then statement
3.else one statement
4. then else statement
Posted Date:-2022-06-07 13:03:32
Statement which gives value to a variable is called
1.assignment
2. real assigning
3.string assigning
4. constant assigning
Posted Date:-2022-06-07 13:14:32
Statement which is treated as choice for a possible actions is classified as
1.case
2.condition
3.error statement
4.variable recognition
Posted Date:-2022-06-07 12:36:06
Type of subroutines which are available to users of computer as default part of software is classified as
1.default routine
2.local subroutine
3.library subroutine
4.default subroutine
Posted Date:-2022-06-07 13:22:58
Values that are passed between program and its called subroutine are classified as
1.argument
2.parameter
3.both (a) and (b)
4. global values
Posted Date:-2022-06-07 13:07:54
When data to be input is numeric in nature, data type in program is classified as
1.string
2.real integers
3.rational string
4.irrational string
Posted Date:-2022-06-07 13:06:56